BR Level 3 Bulletproof Glass
Meeting the BR3 level protection requirements of the EN 1063:1999 standard, it targets high-power revolver threats and is a core product for mid-to-high-end protection scenarios. It is suitable for side windows and front windshields of armed police light patrol vehicles, high-end commercial bulletproof vehicles, and main windows of bank cash transport vehicles. It can also be used for transparent protective walls in important places such as government reception rooms and power dispatching centers, providing high-intensity protection against pistol threats.

Key Performance and Technical Parameters
Protection Capability
It can effectively resist the impact of 0.357 Magnum caliber pistol full metal jacketed/coned/soft-core (FJ/CB/SC type, nominal mass 10.2±0.1g) bullets, fully covering all protection targets of BR1-BR2 levels and capable of dealing with fatal shooting threats from high-power pistols.
Ballistic Performance Indicators
At a test distance of 5.00±0.5m and a bullet impact velocity of 430±10m/s, a 500×500mm sample shows no penetration after 3 valid hits (with a hit spacing of 120±10mm), and the aluminum foil witness layer has no fragment penetration . Adopting a composite structure of "multi-layer inorganic glass + special PC + sapphire blank reinforcement layer", its kinetic energy absorption capacity is 20% higher than that of traditional products, with no risk of fragment splashing after impact.
Core Advantages
Integrating the core technology of chemical transparency of sapphire blanks, it achieves a lightweight design while ensuring protective performance, with a weight 15% lower than that of traditional products of the same level. After 72 hours of high-temperature aging test at 85℃ and low-temperature impact resistance test at -25℃, its structural stability shows no attenuation, adapting to climate conditions in different regions.
Process and Adaptation Advantages
Adopting 3D CNC processing technology, it supports complex multi-curved surface forming (such as curved front windshields), with a tolerance of less than 1mm between the actual outer surface and the theoretical size, adapting to the curved design needs of high-end vehicles. During installation, it is equipped with a special rigid frame and buffer rubber strips to ensure no stress interference during testing and use, while ensuring aerodynamic performance after assembly without affecting vehicle driving stability.
Hot Tags: br level3, China br level3 manufacturers, suppliers, factory, BR Level1, BR Level2, BR Level3, BR Level4, BR Level5, bulletproof glass for en1063 standard
